PDA

View Full Version : Ideas for new tool purchase.

WarnerConstInc.
February 23rd, 2010, 07:54 PM
I need to spend some money on a new tool.

I just don't know what to get.
Leo G
February 23rd, 2010, 07:55 PM
Laser level
WarnerConstInc.
February 23rd, 2010, 08:01 PM
Got one of those.
Leo G
February 23rd, 2010, 08:07 PM
Is it green?
Leo G
February 23rd, 2010, 08:08 PM
How about a planer?
Leo G
February 23rd, 2010, 08:33 PM
I've been framed
Bender
February 23rd, 2010, 08:39 PM
Ok I pulled it:grin:

Sorry Leo, now it looks like your posting random nonsense;)
WarnerConstInc.
February 23rd, 2010, 08:44 PM
Is it green?

no.

How about a planer?

I could use one of those. I don't get all excited thinking about buying one right now though.

He said a tool he wants to buy

What was going on in here?

Ok I pulled it:grin:

Sorry Leo, now it looks like your posting random nonsense;)

Leo is used to talking to him self.
ChrWright
February 23rd, 2010, 09:26 PM
Time for a CNC Router...
WarnerConstInc.
February 23rd, 2010, 09:27 PM
Then 3 phase power.
Leo G
February 23rd, 2010, 09:28 PM
Oh... that'll cost you big. The power company will have your ass for the 3 PH power.
WarriorWithWood
February 23rd, 2010, 09:33 PM
What about that 4' Stabila/Festool lighted level?
WarnerConstInc.
February 23rd, 2010, 09:34 PM
It is like 150.00 minimum a month for 3 phase service.
Good thing is the electric company will take care of everything on the outside, except hook ups.
WarnerConstInc.
February 23rd, 2010, 09:36 PM
What about that 4' Stabila/Festool lighted level?

I pre-ordered that last september duh, I thought everyone did?:laugh3:
Leo G
February 23rd, 2010, 09:38 PM
When I started in my shop my electric bill was $60/mo. Now it is nearing $300. Not much has really change for that increase. Where they get you is the demand charge. They look at your power consumption every 15 minutes. The highest level gets recorded and that is your demand level. So no matter what you are drawing, you are being charged for the highest level. Nice racket.
WarnerConstInc.
February 23rd, 2010, 09:43 PM
I am trying to buy a silverline 8 floor sander.
I don't think that counts though.
WarriorWithWood
February 23rd, 2010, 09:47 PM
I pre-ordered that last september duh, I thought everyone did?:laugh3:

I should have known.http://www.freesmileys.org/smileys/smiley-signs081.gif (http://www.freesmileys.org/smileys.php)
naptownCr
February 23rd, 2010, 09:59 PM
I would buy a flir camera
WarnerConstInc.
February 23rd, 2010, 10:05 PM
I would buy a flir camera

Can that see through shirts?:laugh3:
naptownCr
February 23rd, 2010, 10:29 PM
yes:2thumbsup:
Craig Feuerzeig
February 25th, 2010, 07:15 AM
Oh... that'll cost you big. The power company will have your ass for the 3 PH power.


400 Amps. This part is free...

http://i50.photobucket.com/albums/f339/cfeuerzeig/000_0001.jpg

this part... 10K

http://i50.photobucket.com/albums/f339/cfeuerzeig/000_0002.jpg

Just for the panel. Doesn't count for anything beyond there. :mad2:

So... I definitely have a new tool recommend for you. :grin:
WarnerConstInc.
March 2nd, 2010, 08:10 PM
I figured it out, more systainers.
Every tool I own will be living in on pretty soon.