14" r/i?

[neolitic]

Know of a good 14" rough-in toilet?
If the old one has to be replaced
this will turn into a two floor RRP nightmare.
Not to mention losing a great 90 year old
basket weave floor.

[Eieio]

I have never seen a 14" before 10 and 12" Why do you need a 14"?

[neolitic]

I have never seen a 14" before 10 and 12" Why do you need a 14"?

That is where the plumber
left the flange. :grin:
I have one in my house too.

[SLS-Construction]

Last I checked Kohler makes some - special order of course

[Eieio]

Toto Toilet with a 14" unifit rough in kit??

I have never used it or seen it before, got the info from my Plumbing rep.

[WarnerConstInc.]

http://www.decorisland.com/product/gerber/ef2130409/two-piece-round-front-toilet-w-and-14-rough-in/biscuit/

They carry these around here.

[WarnerConstInc.]

I have built sands/shelves behind some, depends on the customer.

[neolitic]

Last I checked Kohler makes some - special order of course

I will check that. http://i634.photobucket.com/albums/uu61/neoliticman/smilie/smiliethumbsup.gif


Toto Toilet with a 14" unifit rough in kit??

I have never used it or seen it before, got the info from my Plumbing rep.

That one was rejected when we re-did
the bathroom, but I can't remember why?
It was 9 years ago so i'll have to revisit that.
Thanks for reminding me.
The plumber said that he didn't know of an
(just today) so his memory is no better than mine.

http://www.decorisland.com/product/gerber/ef2130409/two-piece-round-front-toilet-w-and-14-rough-in/biscuit/

They carry these around here.

I'll look at that one, but I haven't heard
anything good about Gerber lately.
They used to be able to flush a puppy.

[neolitic]

If I wind up changing this one out,
you wanna come pick up the old one Darcy?
http://i634.photobucket.com/albums/uu61/neoliticman/smilie/smilielaughing.gif

[kevjob]

Som eof my supply houses here carry them in stock and the 10" too. Kohler is great start for those.

[WarnerConstInc.]

If I wind up changing this one out,
you wanna come pick up the old one Darcy?
http://i634.photobucket.com/albums/uu61/neoliticman/smilie/smilielaughing.gif

Is it an old wall mount tank?


I put a Gerber in the MIL's house and have not heard any complaints.

[neolitic]

Is it an old wall mount tank?

Sure is, with a new goose neck
and all...


I put a Gerber in the MIL's house and have not heard any complaints.

Good to know.

[Scott_W]

If you are redoing the floor, why not put in an offset flange? I think they are 1.5" offset.

scott

[neolitic]

If you are redoing the floor, why not put in an offset flange? I think they are 1.5" offset.

scott

The idea is not to replace the floor.

[WarnerConstInc.]

Sure is, with a new goose neck
and all...



Is it a "Standard"?

I put a bunch of Gerber's in rental's as well and never had to go back.

[Eieio]

Sure is, with a new goose neck
and all...




Good to know.

Why not replace it with a new wall mount? no go?

[neolitic]

Is it a "Standard"?

I put a bunch of Gerber's in rental's as well and never had to go back.

I think so, but it's been
too long to be sure.

[neolitic]

Why not replace it with a new wall mount? no go?

As in.....?

[WarnerConstInc.]

As in.....?

All I can find are reproduction high mounts, and they have 12" rough-in's.

[Eieio]

As in.....?

Now I have to dig that up for you..

I installed a few couple of years back and they had 10,12 and 14" rough ins.. Can you bump this in the am please and I will check my file..

[naptownCr]

If all else fails
two words
"offset flange"
That is all carry on

[neolitic]

Now I have to dig that up for you..

I installed a few couple of years back and they had 10,12 and 14" rough ins.. Can you bump this in the am please and I will check my file..

Will do, sounds interesting.

[Eieio]

Will do, sounds interesting.

No problem.. I am working on a ummm several estimates now and did not want to stop. :laugh3:

[neolitic]

Estimated time to the bottom? http://i634.photobucket.com/albums/uu61/neoliticman/smilie/smilielaughing.gif

[neolitic]

Rory, I hope you finished your "estimate."
I forgot I had to meet a roofer
at 8:00 this morning.
To bad I remembered,
waste of time and gas...

[WarnerConstInc.]

That sounds like most of my customers right now Neo.

[Eieio]

Rory, I hope you finished your "estimate."
I forgot I had to meet a roofer
at 8:00 this morning.
To bad I remembered,
waste of time and gas...

left out early too will look later when i get back in

[neolitic]

That sounds like most of my customers right now Neo.

Not the customer,
the "roofer."
In 15 minutes he told me
15 things that are just plain wrong.
He has theories that I have
known are wrong for 30 years.

[WarnerConstInc.]

Still sounds like my customers.

[Eieio]

Ferguson Plumbing either carries or can get these for you.

ProFlo comes in a 14" rough in not sure if its available on all their models

Kolher Wellworth available in a 14" rough in

Sunrise is the old water closet.. 10-14" rough in on all 3 models

Link to Sun rise: http://www.sunrisespecialty.com/sunwaterclosets2.html

Pdf Spec sheet on Sunrise: http://www.sunrisespecialty.com/waterclosets901.pdf

[Eieio]

Kohler Wellworth 14" rough in: http://www.us.kohler.com/onlinecatalog/pdf/115779_4.pdf

Toilet picture with link to the PDF above

Got to love good supply house reps reps..

[neolitic]

Ferguson Plumbing either carries or can get these for you.

ProFlo comes in a 14" rough in not sure if its available on all their models

Kolher Wellworth available in a 14" rough in

Sunrise is the old water closet.. 10-14" rough in on all 3 models

Link to Sun rise: http://www.sunrisespecialty.com/sunwaterclosets2.html

Pdf Spec sheet on Sunrise: http://www.sunrisespecialty.com/waterclosets901.pdf

http://i634.photobucket.com/albums/uu61/neoliticman/smilie/smilielaughing.gif It is a bit newer model
wall hung tank than that one.
I remember looking at those when
we did the remodel though.
FYI: The ProFlo gets some pretty low
ratings any place you look.

Kohler Wellworth 14" rough in: http://www.us.kohler.com/onlinecatalog/pdf/115779_4.pdf

Toilet picture with link to the PDF above

Got to love good supply house reps reps..

I've checked that one,
leaning towards the Gerber
ADA height, except it's 3 weeks out.....